PRODUCT CENTER >
Vane Type Damper
When the rotating shaft moves, the blades integrated with the rotating shaft rotate simultaneously, and the silicone oil in the oil chamber is squeezed towards the gap between the blades and the body, and flows towards the back of the blades< Br/>
The resistance force generated by the pressure borne by silicone oil multiplied by the blade area forms a damping torque on the rotating shaft and blades< Br/>
The torque generated during shaft rotation is determined by the viscosity of the grease, the compressed area of the blades, and the size of the gap between the blades and the body< Br/>
This type of damper is generally used within a rotation range of less than 360 °< Br/>
Various types of cover plates are slowly lowered (washing machines, toilets, trash cans, etc.)< Br/>
Vane Type Damper-DN12C
1. Load torque range:
502-203 (0.5-2N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the horizontal position of the rotating shaft and the horizontal position of the shell installation is 0 °
When the product is shipped, the relative position between the horizontal position of the rotating shaft and the installation horizontal position of the shell is the rotating closed position (which can be opened for shipping)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
502-203 (0.5-2N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the horizontal position of the rotating shaft and the horizontal position of the shell installation is 0 °
When the product is shipped, the relative position between the horizontal position of the rotating shaft and the installation horizontal position of the shell is the rotating closed position (which can be opened for shipping)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
Vane Type Damper-DN16E
1. Load torque range:
103-403 (1-4N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the horizontal position of the rotating shaft and the horizontal position of the shell installation is 0 °
When the product is shipped, the relative position between the horizontal position of the rotating shaft and the installation horizontal position of the shell is the rotating closed position (which can be opened for shipping)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
103-403 (1-4N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the horizontal position of the rotating shaft and the horizontal position of the shell installation is 0 °
When the product is shipped, the relative position between the horizontal position of the rotating shaft and the installation horizontal position of the shell is the rotating closed position (which can be opened for shipping)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
Vane Type Damper-DN16F
1. Load torque range:
103-403 (1-4N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the horizontal position of the rotating shaft and the horizontal position of the shell installation is 0 °
When the product is shipped, the relative position between the horizontal position of the rotating shaft and the installation horizontal position of the shell is the rotating closed position (which can be opened for shipping)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
103-403 (1-4N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the horizontal position of the rotating shaft and the horizontal position of the shell installation is 0 °
When the product is shipped, the relative position between the horizontal position of the rotating shaft and the installation horizontal position of the shell is the rotating closed position (which can be opened for shipping)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
Vane Type Damper-DN18A
1. Load torque range:
802-253 (0.8-2.5N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the flat position of the rotating shaft and the flat position of the shell installation is 90 °. When the product is unloaded, the relative position between the flat position of the rotating shaft and the flat position of the shell installation is the rotating closed position (which can be opened for unloading)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
802-253 (0.8-2.5N · m), with a specified output torque, the closing time of the testing machine is 11 ± 4s< Br/> Open to 110 ° position, close to 70 ° to start slow down timing, and measure the closing time at an angle of 70 °~0 °< Br/> 2. Rotation angle reference:
The angle between the flat position of the rotating shaft and the flat position of the shell installation is 90 °. When the product is unloaded, the relative position between the flat position of the rotating shaft and the flat position of the shell installation is the rotating closed position (which can be opened for unloading)< Br/> 3. Rotation angle:
The maximum rotation angle of the damper is 110 °. Please ensure that the damper is used within the range of 0-110 ° angle< Br/> 4. Frequency of use and durability cycle test:
4 times per minute (1 time for forward rotation of 110 ° and reverse rotation of 110 °)< Br/> After 50000 cycles, the closing time is ≥ 3 seconds< Br/> Reciprocating from 110 ° to 0 °, with a mandatory durability of less than 2 seconds per cycle. After 12000 cycles, let it stand for 24 hours and a closing time of ≥ 3 seconds< Br/> 5. Suggested temperature range: -10~50 ℃, maximum storage temperature range -20~80 ℃< Br/> 6. The damper is not an external component, with no damage or oil stains on the surface, and the identification is correct< Br/> 7. Unmarked tolerances shall be accepted according to GB/T14486-2008 MT5 level< Br/>
Previous
1
2
Next page
CONTACT US
Address: 2/F, Building 2, No. 207, Louming Road, Xinhu Street, Guangming District, Shenzhen, China.
Telephone number:153-614-59596 Mr Lam、181-299-46765 Mr Hong
Website:WWW.ABDABD.COM
QR CODE
ONLINE MESSAGE
客户留言
DESCRIPTION:
Copyright◎2023 ABD EQUIPMENT CO.,LTD. 备案号:粤ICP备15000243号-1 BY:xinnet Business license